Problem Panorama from Dominique

Hi Dominique,

Please take a look at what Panoweaver can do with your images. You'd better download it on to your local computer as the panorama is kind of big.

Cubic Panorama, 25.2MB: http://www.easypano.com/twtest/joe/cubic.jpg

Hope you will like it.

---

Easypano Holdings Inc.

Hi Joe,

I checked both results, I'm surprised by the way you used to wipe my tripod !

Btw, there are still stiching errors, but far less than my results, but yet more than with PW6 !

 

---

Nikon D300s - Nikor 10.5 - (PW7 Pro + TW6 Pro) - W7 Ultim - DELL Prceision M6400 (Quad Core - 8GB - 2x160GB-SSD)

Hi Dominique,

The error was not cuased by stitching, but in the process of converting from cubic panorama. This wil also be fixed soon.

We have updated the installer and if you use it to stitching your images with strong algorithm again, you will find no problem at all now.

Your tripod was removed by the program automatically, and this feature is coming soon. Hope you will like it.

---

Easypano Holdings Inc.

NICE !

Is the kit already available ?

BEST regards and THANKS,
Dominique.

EDIT : --> doanloaded :-)

---

Nikon D300s - Nikor 10.5 - (PW7 Pro + TW6 Pro) - W7 Ultim - DELL Prceision M6400 (Quad Core - 8GB - 2x160GB-SSD)

That's pretty slick with the program removing the tripod. Did a fair job of it. That may be worth the upgrade.

---

Nikon D300, D3s, Nikon 10.5 lens, RingT105N+Footplate+MrotatorTCPs, Giottos MT9261 Tripod, Manfrotto 410 Jr geared head.

If you know the "secret" then everyday is a good day!

For me I'm afraid if it's not 100% it is pointless. For low end stuff people "may" find it acceptable. Not me.

Joe, I would be ashamed to display stitching of that quality.

Keep the programmers on the job and see if you can improve the output.

Regards, Smooth

---

Hi Smooth, if for stitching only, no problem at all. As I put it, the error was cuased while converting the cubic panorama back into spherical one after stitching. You can download the new installer and try the images posted by Dominique. Remember to use strong algorithm.

I has asked our programmer to fix the bug in converting the cubic panorama. Hope it will also be fixed soon.

---

Easypano Holdings Inc.

Oh OK, I see. I downloaded the spherical image and noticed many errors. Why would you show that? You should have stitched to spherical and shown the result and "then" converted to cube faces.

No need to recompile in this situation.

I will test the "improved" new BETA.

I wish you would add the build number to the .exe file or at the very least add it to the download page so people can keep track.

Regards, Smooth  

---

Hi Smooth, Thank you for your suggestions. I'm not sure if my people have made everything correct or not becuase it is very late here, but the installers of both PW7 and TW6 have been updated. I will check this out later.

---

Easypano Holdings Inc.

For my part, I stitch directly into spherical !
Is this wrong ?

Dominique

---

Nikon D300s - Nikor 10.5 - (PW7 Pro + TW6 Pro) - W7 Ultim - DELL Prceision M6400 (Quad Core - 8GB - 2x160GB-SSD)

No. You do nothing wrong. In future version of panoweaver, you need to convert spherical panorama into cubic one before removing the tripod automatically. I just want to show you this feature will be available soon.

---

Easypano Holdings Inc.